Customize graphics systems Netsyst

Customization of system graphics Netsyst it can be done very simply by applying an adhesive polyester film on top of the existing one. For best results, the thickness of the film must not exceed 4/10 mm.

This operation can be carried out either directly by the customer, or requested from our company. In the first case, the Customer will be the one to fully manage the operation and there will be no cost on our part as we would continue to supply the standard product. In the second case, the Customer must in any case provide the scaled graphic file (in JPG or Corel format) with the indications of the colors used in the Pantone range, and the quantities of films required, and our company will produce an offer including an initial cost of contribution for tooling costs and unit cost per film. The application of the films on the products will remain the responsibility of the Customer.

Standard graphics with keyboard

Below is the standard graphics that equip the systems Netsyst equipped with keyboard, with the dimensions (in mm) to be respected in the execution of customized graphics.

Standard graphics without keyboard

Below is the standard graphics that equip the systems Netsyst without a keyboard, with the dimensions (in mm) to be respected in the execution of customized graphics.

Example of customization

Below: graphics created by Fast Spa on a system used for remote control applications through the Web.

Was this article helpful?