- This topic has 1 replies, 2 participants and was last updated 5 years, 10 months ago da .
Viewing 2 posts - 1 to 2 (of 2 total)
Viewing 2 posts - 1 to 2 (of 2 total)
- You must be logged in to reply to this topic.
Home > Forum > obsolete > SlimLine (CODESYS) > Connection of proprietary cards to the expansion bus
Wanting to use the I2C expansion bus to connect some proprietary cards, I wonder what is the maximum current that the + 5Vdc (the one for sensitive electronics) is able to deliver and how many devices can be connected to the reset signal.
The + 5Vdc and + 5V (AUX) signals are connected together on the CPU module, we have diversified them on the BUS with the intention of connecting the electronics to the + 5Vdc and any loads to + 5V (AUX) (for example our boards expansion cables connect the relay coils).
This type of connection allows to have a lower voltage drop on the + 5Vdc due to the lower load. The total current supplied, however, is that indicated in the characteristics (In the case of MPS052 it is 2.5A).