- This topic has 1 response, 1 participant and was last updated 8 years, 10 months ago da .
Viewing 2 posts - 1 to 2 (of 2 total)
Viewing 2 posts - 1 to 2 (of 2 total)
- You must be logged in to reply to this topic.
Home > Forum > obsolete > SlimLine (Linux) > How to manage analog module outputs SlimLine
How can I drive the analogue outputs of the expansion board Slimline Analog I / O PCB126B150? I have not found instructions for this purpose in the libEISLinux.a library
In fact we noticed that in the management library SlimLine Linux (ElSLLinux) version SFR064A700 by mistake, the analog output module management functions were not included. I proceeded to release the new SFR064B000 library with two new functions (The library can be downloaded from the web page of the module ARM9 Linux CPU): bool_t eSLineAOMode (uint8_t Module, uint8_t Channel, uint8_t Mode); // Analog output set modebool_t eSLineAOValue (uint8_t Module, uint8_t Channel, float32_t Value); // Analog output set value In the file ElSLLinux.h definitions of the various acquisition and management modes supported by the analog I / O modules have also been added (Here is the extract of the IEC61131-3 Programming Manual).