Home > Forum > Operator terminals (Weintek) > TCP / IP ports used on Weintek terminals
- This topic has 7 replies, 3 participants and was last updated 8 years, 5 months ago da Sergio Bertana.
-
AuthorPost
-
September 17, 2010 at 7: 53 am #34898AuthorlessIdle
I should remotely connect to a Weintek terminal using a wireless connection with a UMTS router to perform remote programming operations.
I would need to know the TCP / IP ports used by the terminal in order to configure the port-forwarding of the router in order to be able to remotely access all the functions of the terminal.
September 17, 2010 at 7: 56 am #36525Sergio BertanaAdministrator ForumThere is a set of predefined, non-editable active ports.
21: To log in to FTP
5900: For accessing the terminal from VNC
20248: For programming operations by EasyBuilder (See post)For access to the terminal for remote assistance operations (Example pass through), the port is defined by default 8000, but this port is definable in the menu Edit -> System parameters activating the tab Model.
January 19, 2012 at 7: 21 am #37108Sergio BertanaAdministrator ForumIn the previous post some indications are missing, furthermore the 8000 port is not the port used for the Pass-Thru but it is the port used to connect with other terminals remotely.
I enclose a list of the ports used by the terminals (Download).
October 8, 2015 at 1: 45 pm #39080StefanoParticipantI need to remotely access a cMT-SVR Cloud HMI panel, I didn't find which ports to open in NAT on my router. In the posted list they are not indicated, could I have an indication?
October 8, 2015 at 1: 48 pm #39081Sergio BertanaAdministrator ForumThe post with the table is a bit dated, it was compiled before the release of the panel Cloud HMI cMT-SVR. The Cloud Panel access app uses the following ports.
TCP 80: System Setting / Misc.
TCP 8000: COM
TCP 10763: For UAC, Trend, Event Display
UDP 10275: Search HMIOctober 12, 2015 at 1: 31 pm #39082StefanoParticipantI was wondering and if it is possible to change the TCP / IP ports defined on the terminals, for example the HTTP port from 80 to other values.
October 12, 2015 at 1: 33 pm #39083Sergio BertanaAdministrator ForumOnly some doors are editable, such as:
Pass throught port (2000 standard)
HMI port (8000) used to communicate with simulators, PCs, remote panels
FTP port (21) this can be changed for standard panels in the setting directly on the panel
Download port (20248) this can be changed for standard panels in the setting directly on the panelAs for the other ports, for now they can not be changed.
October 30, 2015 at 10: 37 am #39122Sergio BertanaAdministrator ForumI add one table with the list of TCP / IP ports used.
-
AuthorPost
- You must be logged in to reply to this topic.