- This topic has 0 replies, 1 participant and was last updated 12 years, 9 months ago da .
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
Home > Forum > Interface converters > Logical I / O management from TCP / IP on the ATC-2000M module
The module ATC-2000M it is the "heart" of the converter ATC-2000, the module as seen from the relative documentation (downloadable from the product web page) has 3 inputs and 2 digital outputs, in the product ATC-2000 these I / O are not used.
The ATC-2000M can be purchased as an OEM module that can be inserted in your own product, in this case it is possible to use the logic I / O. The status of the I / O can be managed from a UDP connection (by default on port 50001) using a specific protocol (See documentation).
It is also possible to manage the exchange of I / O between different devices and / or send an Email on the change in the status of the inputs simply by configuring the required functions from the web page (See documentation).