Home > Forum > News and information > Free serial COM virtualization program
tagged: com port
- This topic has 2 replies, 2 participants and was last updated 5 years, 1 month ago da FaltonNikk.
-
AuthorPost
-
November 13, 2014 at 9: 13 am #35664Sergio BertanaAdministrator Forum
A serial port virtualization program (VirtualCOM) is supplied with all our Ethernet-Serial and / or WiFi-Serial converters. This type of program is installed as a Windows service and makes available a COM serial port very similar to the standard COM of the PC but which is actually the serial port of the converter The dialogue between the VirtualCOM program on the PC and the converter takes place with TCP / IP protocol and / or in some cases with UDP protocol. Unfortunately, sometimes these programs have difficulty working properly due to incompatibility with other programs installed on the PC. Among the companies we distribute there is the HWgroup which also has a COM port virtualization program in its offer which is provided free of charge. for use with a single COM port. While in combination with the HWgroup converters it is also provided free of charge in the multi-port version (WebHere is a use of the software on Windows 7 64 bits operating system (Screenshot). A ATC-3000 while a USB-Serial converter was used for the serial port ATC-810 (See photos).
October 5, 2017 at 12: 56 pm #39985Sergio BertanaAdministrator ForumReturn to this article in our knowledge base for more information.
March 26, 2019 at 7: 10 am #47154FaltonNikkParticipantI would recommend the use of https://www.eltima.com/it/products/vspdxp/ to create virtual ports. I only use her for my projects. I believe it will help you.
-
AuthorPost
- You must be logged in to reply to this topic.